Smart Tips For Using A Hydraulic Vehicle Lift

Hydraulic truck lifts are designed as a safeDon't make the mistake of raising the equipment
method of raising various transportation units forall the way at the start. When you start these
different types of repairs and maintenance. Usingsystems, only raise them until they are fully
them incorrectly, however, can be dangerous.supported by the truck lifts and then stop. This
Each step involved in using this equipment requiresoften works out to around a foot. You can then
great care and attention to protect yourself anddo a walk around to ensure the support pads are
the others around you. Here are a few guidelineswhere they need to be and that the load isn't
you can use when loading, raising, and lowering ashifting on the supports. Take an extra few
hydraulic vehicle lift.seconds to examine the adaptors as well. Having
Securing Vehicles On Hydraulic Truck Liftsthe force exerted in the wrong areas can cause
To correctly load a hydraulic vehicle lift, be surea significant amount of damage to the body and
the doors are closed tightly, the transmission isother components of the auto. Continue to test
sitting in neutral, and the engine is off. You will alsoand check the load until there is no doubt in your
want to check to see if there is anything, such asmind that everything is done correctly. Each time
an antenna, that could be damaged when it isyou make an adjustment check everything the
completely up in the air. Once that is complete,same way.
find the correct locations underneath the lift toRaising The System
hold the auto into place and set the pads intoWhen you are sure it is safe to elevate the load,
position. You will also want to set up adaptors ifhoist it up slowly and go slower as you reach the
you need them.top of the system to avoid jerking the load. Doing
Before walking away from the area, check thethis can shift the placement of the load and will
blocks responsible for holding everything in place.loosen the seal on the hoist, which will cause the
The front end of the stand will have permanentfluids to start leaking. When it has reached the
chocks. The entrance end will have automaticdesired height, stop and lock the system into
chocks that you will need to check to be sureplace.
that they are up and secure. Even if everythingWhile a vehicle lift is meant to be a safe way to
seems okay, be sure to watch for movementhoist an auto into the air for easy repairs, using it
and double check the automatic chocks when youincorrectly can be downright deadly. To protect
start to move the system to be sure thatyourself and others, make sure to load truck lifts
everything is held safely.correctly and lift them with care and caution.
Checks Before Raising The Vehicle Lift